|
CFM Performance: Product Lines: Yamaha Wolverine
(click image for larger photo)
| Yamaha Wolverine Aluminum Airbox
This newly released high flow air box allows your motor to breathe much better without sacrificing engine protection. Not only does our air box protect your engine from mud and water as good as the stock air box but it allows for 35% more air flow. As we all know, more air flow equals more horsepower. We have seen an increase of 4-6 horsepower on our Warrior and Wolverine just by installing this air box. Have you ever wondered if your filter was seated properly? Eight out of ten Warrior and Wolverine engines that we have seen fail, do so because the engine sucked up dirt through an improperly installed air filter. With the CFM Performance high performance air box this is no longer a problem. Not only does our air box flow better, but it is designed to use a clamp on air filter. What does this mean? You will know without a doubt that your filter is installed properly. This air box is designed to accept a 2 3/4" flange I.D. x 6" long UNI filter available from CFM Performance. Other unique features include the ability to remove the lid for even better performance. We have also incorporated provisions to use the stock drain boot and crankcase vent attachment. |
 (click image for larger photo)
| Yamaha Wolverine Lift Kit
NEW complete front and rear lift kit made by CFM Performance. It will fit any year Yamaha Big Bear or Wolverine. With the kit installed you will gain 2" of ground clearance, measured from the bottom of the frame to the ground. This extra height makes a huge difference when riding in mud, snow, or any nasty terrain. Also allows you to install much larger wheels and tires without the tires rubbing on the fenders. CFM Performance has long been an industry leader in the manufacturing of high quality ATV accessories, so you can buy with confidence. The lift kit comes with all necessary mounting hardware. No modifications are necessary to your stock components. We have been testing these lift kits, in the worst conditions that we can find, for the last 9 months, with no problems. |
(click image for larger photo)
| Yamaha Wolverine Exhaust Tip
The most restrictive part of your stock exhaust system is the 3/4" diameter hole in the exhaust tip. With your stock tip, the exhaust is forced to make a 90 degree turn through the spark arrestor and another 90 degree turn to come out the tip. With the CFM Performance high flow exhaust tip there are no restrictive 90 degree turns. The exhaust comes straight through an opening that is 30% larger than stock, and straight through a stainless steel spark arrestor screen. It bolts on in a few minutes with no modifications to your stock silencer, and it sounds great with out being too loud. This high performance exhaust tip makes a big difference in throttle response and top end horsepower. |
|
(click image for larger photo)